Did you configure static or dynamic routes on ELTEX ESR?

ELTEX ESR is a series of routers and switches that support configuration of both static and dynamic routes.

Static routes are usually configured manually for fixed paths, for example:

ip route add 192.168.2.0/24 via 192.168.1.1

Dynamic routes on ELTEX ESR can be configured using routing protocols such as OSPF or RIP, if the device supports them.

Configuring static routes typically involves using the device's CLI, while dynamic routes require enabling the protocol and configuring neighbors.

If you configured routes, you probably used CLI commands like ip route for static routes or router ospf for dynamic routes.